Speedview offers riders the largest view area of any roll-off system in the world! A massive 108% more viewing area than any standard roll-off system.

A you can clearly see Speedview offers a huge 729 cm² of viewing area – perfect for all off road sports!

See the difference >>>

The viewing area form a standard roll-off goggle 351 cm²- and people race at speeds using this limited vision!?

Wireless Technology

Speedview’s wireless system was designed to take advantage of the latest wireless technology incorporating some very innovative features.

Speedview wireless Spec: -

Transmit frequency band: 2.4GHz: – Speedview will work in any and every country.
Unique transmit ID address for each transmitter: – Speedview has over 15 million unique ID’s, no one system will interfere with another.
No of command frequency channels: – 250, set by transmitter address
Data rate: – 250kb/s
Transmitter battery life: – 3 to 5 years (depending on usage and temperature)
Receiver battery life: – up to 5000 clears (depending on usage and temperature)
Transmit range: – more than 10m, including head shadowing
Error checking: – 16-bit Cyclic redundancy check
Message Time diversity: – triple
Response time: – Less than 50ms

Wireless communication is the transfer of information over a distance without the use of electrical conductors or wires.

The electromagnetic spectrum

Light, colours, AM and FM radio and electronic devices make use of the electromagnetic spectrum. In the US the frequencies that are available for use for communication are treated as a public resource and are regulated by the FCC. This determines which frequency ranges can be used for what purpose and by whom. Wireless communication spans the spectrum from 9 kHz to 300 GHz.

Speedview’s PCB hardware interface includes an analogue RSSI output; an internal 3.3V regulator allows the device to operate from supplies in the range of 3 to 6V, requiring 25 mA for transmission and 19.5 mA for reception at the 5V level. When idling between data exchanges, consumption falls to around 5 mA helping to maintain battery life.

A sleep-mode command reduces consumption to about 120 µA, requiring the user to press the trigger to re-enable the link. If the module has powered up beforehand at the current frequency assignment, it is ready within 13 msec; recalibration to a new setting takes 75 msec.

The PIC microcontroller within the receiver unit buffers up to 180 bytes of data and supports baud rates up to 115,200 at its digital I/O. Speedview’s EU applications in the 433-to-434-MHz band uses a 433.92-MHz spot frequency. Within the US we use a 420Mhz frequency chip and in Australasia we use a 915Mhz frequency chip; the ability to select from 10 channels within these ranges overcomes potential interference or network co-existence problems. All wireless signals use an encrypted 16-bit seed data chip.

Speedview’s advanced microcontroller

Speedview advanced microcontroller is a small computer mounted onto the receiver board. The microcontroller consists of a relatively simple CPU combined with support functions such as a crystal oscillator, timers, watchdog, serial and analogue I/O etc.

Speedview’s microcontroller is designed to control the systems wireless encoding and de-coding systems and the motors advanced algorithm timing system. Thus, in contrast to the microprocessors used in personal computers and other high-performance applications, simplicity is emphasized. Speedview’s microcontroller operates at a low clock frequency, enabling low power consumption (milliwatts). The microcontroller has the ability to retain functionality while waiting for a trigger press; power consumption while in auto power mode is just nanowatts, making it well suited for long lasting usage.

Speedview offers the largest uncompromised viewing area of any roll-off system.

A standard roll-off goggle gives you approximately 351cm² of viewing area when covered in mud or dirt, Speedview give you a massive 729 cm² of viewing area when covered in mud or dirt, that’s a 108% increase in view area.

Speedview also offers a widest peripheral viewing area approximately 160° degrees wide helping you see more of what’s around you or what’s coming behind you.

Redraven Warrior Goggle – Vision is everything!

Redraven’s Warrior goggle provides innovative technology, reliability and overall comfort demanded by athletes and racers in the action sports industry. The Warrior goggle improves safety and performance and is designed with four direct advantages: reduced fogging, increased comfort on a wide variety of face types (and over eyeglasses), fully sealed protection for reduced eye irritation from airborne debris and particles, and an improved and wider field of view.

Advanced Articulating Outrigger System
The Warrior’s strategically positioned outriggers transfer pressure from the goggle evenly across the face to create a complete and comfortable seal around the face.

Comfortable anatomical fit

The Warrior provides an extra wide field of view with ample fit over eyeglasses. A key feature of the Warrior’s performance is its seal and comfortable fit which has been designed to minimise gaps and pressure points. Correct anatomical fitting will protect against dirt and dust. Warrior’s high-quality goggle uses a combination of anatomical modelling and malleable face padding to provide a sealed fit that is comfortable to wear for longer periods.

Moisture wicking premium 3 layer Foam
Warriors hypoallergenic premium face foam is laminated with Hydrofil, designed to wick away moisture and sweat from the face area.

Warrior’s 3-Split Nose

The Warrior goggle has been designed with a 3-split nose area allowing for a more comfortable fit around the bridge of the nose.

Super-sticky Strap with rapid strap-adjustment systems
The Warrior’s straps are backed with super sticky silicone wave providing maximum grip to all helmets. High-memory elastic straps with convenient length adjusters also ensure a proper fit.

Dual Layer Lens

Dual layer lexan lenses offer unmatched impact and scratch resistance, crystal clarity, and 100% UVA/B/C protection. Minimizing condensation requires the goggle lens to have an effective chemical anti-fog coating. High airflow dissipates humidity that otherwise would condense as fog on the lens.

Air system

The Warrior venting system prevents fogging by forcing air through the goggle chamber. The air flow is directed away from the eyes to eliminate tearing or eye dryness. The Warrior goggle’s large ventilation zones and larger air volumes inside the frames maximize airflow and minimize condensation.

Advanced materials – Speedview

Speedview’s track, cover and dual lens have all been designed to utilise the mechanical properties of polycarbonate: a tough, dimensionally stable, transparent thermoplastic that offers many high performance properties. This versatile thermoplastic maintains its properties over a wide range of temperatures, from -40″F to 280″F.

It withstands the highest impact of any thermoplastic as it has outstanding dimensional and thermal stability, exceptional machinability, stain resistant and non-toxic with low water absorption. All in all polycarbonate is the best choice material offering Speedview maximum quality, reliability and performance.

MECHANICAL PROPERTIES:

Specific gravity (ASTM D 792) : 1.20
Tensile strength, Ultimate (ASTM D 638) : 9,000 p.s.i.
Elongation at break (ASTM D 638) : 130%
Tensile modulus (ASTM D 638) : 3.1×10~5 p.s.i.
Rockwell hardness (ASTM D 785) : R118
Impact strength (73° F) (ASTM D 256) (notched) : 17.0 ft-lb/inch
Flexural strength (ASTM D 790) : 14,200 p.s.i.
Flexural modulus (ASTM D 790) : 3.4x 10~5 p.s.i.
Wear factor against steel 40 psi 50 fpm : 2500×10~10
Coefficient of friction 40psi 50fpm : 0.38 Dynamic

THERMAL PROPERTIES

Melting point : 310° F
Heat deflection at 66 psi (ASTM D 648) : 285° F
Heat deflection at 264 psi (ASTM D 648) : 270° F
Maximum serving temperature for short term : 275° F
Maximum serving temperature for long term : 240° F
Thermal conductivity (ASTM C 177) : 1.35 Btu-inch/hr-ft~2- ° F
Specific heat : 0.30 Btu/lb- ° F
Coefficient of linear thermal expansion (ASTM D 696) : 3.7×10~5
Applicable temperature range for thermal expansion : 0-200° F

Dual polycarbonate anti-fog lens

Speedview uses a dual layer polycarbonate anti-fog lens to: -

Double the amount of impact protection from flying debris offered by a standard single layer goggle. Your eyes are important we want you to keep them.

Reduce internal fogging by trapping a small volume of air in between the two PC layers, this trapped air reduces the heating and cooling effect on the internal lens which in turn reduces fogging. Speedview’s anti-fogging dual lens keeping your vision clear at all times.